Frisco, Texas
Lift and crane rental in Frisco, TX
Frisco runs on large mixed-use developments where the same site needs rough terrain machines during the frame and electric slab machines during the fit-out, often in the same month. Swapping mid-hire is normal here.
We arrange scissor lifts, boom lifts, telehandlers, forklifts and cranes across Frisco. We don't run a yard in Frisco. We match your job to vetted local suppliers and stay on it until the machine is on site.
What a Frisco job costs to price
Real Texas market rates by machine size and hire length. Change anything and the figure updates.
| Rental, 7 days | $230–$500 |
| Delivery and pickup | $300–$480 |
| Environmental fee (2%, capped at $99) | $5–$10 |
| Subtotal | $535–$990 |
| Texas sales tax (8.25%) | $44–$82 |
| Estimated total | $579–$1,072 |
|---|
Frisco prices off the statewide band, with no metro adjustment. Sales tax only. The TERP surcharge applies to off-road diesel equipment, so it does not apply to this machine.
Prices are estimates based on published Texas rental rates, not quotes. Your final price depends on availability, delivery distance and how long you keep the machine.
What equipment costs in Frisco
We don't publish a Frisco-specific rate. Below the five largest Texas metros the rate sampling is too thin to mean anything. One suburb can appear 40% more expensive than the city next to it purely because three machines were listed that week. Frisco jobs price off the statewide band, adjusted for haul distance from the nearest yards.
Rates last checked .
As a worked example, a 26 ft electric scissor lift comes to $340–$500 for a week here. The same machine costs $150–$230 for a single day, which is the clearest illustration of how sharply rental pricing rewards duration: a week is roughly two and a half day rates, and four weeks is roughly five, not the nine that a lot of online cost guides still repeat.
Tax is worth planning for. Texas charges 8.25% sales tax on bare rental, and adds a 1.5% TERP surcharge on off-road diesel equipment rated 50 horsepower or more. An electric scissor lift is taxed at 8.25%; a diesel rough terrain machine can reach 9.75%. Most rental price guides never mention it. How Texas taxes equipment rental sets out both, along with the operator exception.
Frisco forklift rental
Warehouse cushion-tire, outdoor pneumatic and rough-terrain forklifts from 5,000 lb up.
Frisco forklift rental is a smaller market than the metro terms, so these are the sizes suppliers covering Frisco carry as standard rather than a full catalogue. Quotes for forklift rental in Frisco are written against the specific size, not the category, so the working height matters more than the machine name. Rates below are the statewide Texas band.
| Size | Day | Week | 4 weeks |
|---|---|---|---|
| 5,000 lb cushion | $250–$363 | $625–$1,000 | $1,250–$2,625 |
| 8,000 lb cushion | $438–$510 | $951–$1,075 | $2,200–$2,500 |
| 10,000 lb cushion | $600–$700 | $1,550–$1,800 | $3,600–$4,200 |
| 5,000 lb pneumatic | $250–$363 | $625–$1,000 | $1,250–$2,625 |
| 8,000 lb pneumatic | $363–$500 | $1,025–$1,063 | $2,125–$2,552 |
| 10,000 lb pneumatic | $544–$590 | $1,244–$1,475 | $2,400–$3,530 |
| 6,000 lb rough terrain | $350–$438 | $563–$1,031 | $1,625–$1,988 |
| 8,000 lb rough terrain | $420–$480 | $980–$1,060 | $2,300–$2,600 |
Statewide Texas band. We don't publish a Frisco-specific rate. Below the five largest metros the rate sampling is too thin to mean anything.
Frisco crane rental
Rough-terrain, all-terrain, crawler and tower cranes, bare or operated and maintained.
Cranes are the one category we will not put a day rate on. They are billed by the hour against a minimum, with mobilization charged separately in each direction, and for larger machines bare rental is quoted by the month. Send us the pick, meaning weight, radius and site access, and we come back with a real figure from a Frisco-area crane house.
| Size | Day | Week | 4 weeks |
|---|---|---|---|
| 30-45 ton rough terrain | Quoted by hand | ||
| 50-75 ton rough terrain | Quoted by hand | ||
| 90-130 ton all terrain | Quoted by hand | ||
| 100-150 ton crawler | Quoted by hand | ||
| Tower crane | Quoted by hand | ||
Statewide Texas band. We don't publish a Frisco-specific rate. Below the five largest metros the rate sampling is too thin to mean anything. Rows marked as quoted by hand are billed on a basis a day rate would misrepresent.
Frisco boom lift rental
Articulating and telescopic booms from 30 ft to 185 ft, electric and diesel.
Frisco boom lift rental is a smaller market than the metro terms, so these are the sizes suppliers covering Frisco carry as standard rather than a full catalogue. Most people who rent a boom lift in Frisco take it for a week or more, which is where the rate stops being a day rate. Rates below are the statewide Texas band.
| Size | Day | Week | 4 weeks |
|---|---|---|---|
| 30-45 ft articulating | $375–$550 | $890–$1,280 | $2,000–$2,900 |
| 45-60 ft articulating | $420–$715 | $1,220–$1,750 | $2,070–$5,200 |
| 60-80 ft articulating | $625–$1,220 | $1,590–$3,000 | $3,000–$7,000 |
| 40-60 ft telescopic | $438–$650 | $1,050–$1,750 | $2,190–$3,080 |
| 60-80 ft telescopic | $625–$1,060 | $1,376–$2,410 | $3,000–$5,950 |
| 80-125 ft telescopic | $960–$1,800 | $2,250–$4,510 | $5,060–$12,000 |
Statewide Texas band. We don't publish a Frisco-specific rate. Below the five largest metros the rate sampling is too thin to mean anything.
Frisco scissor lift rental
Electric slab scissors for finished floors and rough-terrain scissors for open ground.
Frisco scissor lift rental is a smaller market than the metro terms, so these are the sizes suppliers covering Frisco carry as standard rather than a full catalogue. The scissor lifts for rent in Frisco come off regional fleets rather than one local yard, so availability moves with what the rest of the metro is doing. Rates below are the statewide Texas band.
| Size | Day | Week | 4 weeks |
|---|---|---|---|
| 19 ft electric | $95–$175 | $230–$500 | $430–$900 |
| 26 ft electric | $150–$230 | $340–$500 | $620–$1,100 |
| 32 ft electric | $220–$360 | $520–$730 | $950–$1,650 |
| 40 ft electric | $310–$400 | $700–$850 | $1,450–$1,900 |
| 26 ft rough terrain | $300–$420 | $700–$880 | $1,250–$1,700 |
| 32 ft rough terrain | $330–$420 | $740–$890 | $1,600–$1,950 |
| 40 ft rough terrain | $395–$450 | $875–$1,100 | $1,900–$2,250 |
Statewide Texas band. We don't publish a Frisco-specific rate. Below the five largest metros the rate sampling is too thin to mean anything.
Frisco telehandler rental
Reach forklifts from 5,000 lb to 15,000 lb, with 19 ft to 56 ft of lift height.
Frisco telehandler rental is a smaller market than the metro terms, so these are the sizes suppliers covering Frisco carry as standard rather than a full catalogue. Quotes for telehandler rental in Frisco are written against the specific size, not the category, so the working height matters more than the machine name. Rates below are the statewide Texas band.
| Size | Day | Week | 4 weeks |
|---|---|---|---|
| 5,000 lb / 19 ft | $403–$553 | $1,166–$1,270 | $2,863–$3,028 |
| 6,000 lb / 42 ft | $584–$750 | $1,250–$1,398 | $2,744–$2,993 |
| 8,000 lb / 43 ft | $595–$1,000 | $1,526–$1,750 | $3,125–$3,825 |
| 10,000 lb / 55 ft | $802–$1,250 | $1,753–$3,375 | $4,378–$8,750 |
| 12,000 lb / 55 ft | $978–$1,444 | $2,253–$3,125 | $5,385–$7,500 |
Statewide Texas band. We don't publish a Frisco-specific rate. Below the five largest metros the rate sampling is too thin to mean anything.
Frisco bucket truck rental
Road-legal insulated and non-insulated aerial devices from 35 ft to 75 ft.
We quote bucket truck rental in Frisco by hand rather than estimating it. Published rates for these units vary so widely between sources that an on-screen number would be misleading, and because they are road-legal the tax treatment differs too.
| Size | Day | Week | 4 weeks |
|---|---|---|---|
| 35 ft | $250–$400 | $750–$1,200 | $2,000–$3,000 |
| 45 ft | $300–$500 | $900–$1,450 | $2,200–$3,600 |
| 55 ft+ | $400–$770 | $1,200–$2,200 | $3,250–$5,500 |
| 20-30 ton boom truck | Quoted by hand | ||
Statewide Texas band. We don't publish a Frisco-specific rate. Below the five largest metros the rate sampling is too thin to mean anything. Rows marked as quoted by hand are billed on a basis a day rate would misrepresent.
Frisco man lift rental
One-person push-around and personnel lifts from 12 ft to 31 ft for indoor work.
Frisco man lift rental is a smaller market than the metro terms, so these are the sizes suppliers covering Frisco carry as standard rather than a full catalogue. Most people who rent a man lift in Frisco take it for a week or more, which is where the rate stops being a day rate. Rates below are the statewide Texas band.
| Size | Day | Week | 4 weeks |
|---|---|---|---|
| 20-31 ft personnel lift | $175–$235 | $390–$490 | $685–$750 |
Statewide Texas band. We don't publish a Frisco-specific rate. Below the five largest metros the rate sampling is too thin to mean anything.
Working conditions in Frisco
Changes within a single project. The same Frisco site is unimproved clay during the frame and a finished slab during fit-out, often within the same quarter, which is why machines get swapped mid-hire here more than anywhere else on this list.
North Texas convective wind during the structural phase, then largely irrelevant once the building is closed in.
Suppliers haul into Frisco on the Dallas North Tollway, SH 121 and US 380. Distance from the yard is usually the largest single variable in a delivery charge, which is why we ask for the site address rather than just the city.
Frisco generates too little standalone search demand to read a local equipment mix from, which is itself informative: the fleet serving it is based elsewhere. In practice that means Dallas, roughly 26 miles away, and the haul is a real line on the quote rather than a rounding error.
The work driving equipment demand here is mixed-use and sports development and commercial fit-out. That shapes what local yards stock, and it is the reason availability tightens for some classes and not others. See also wind limits and Texas heat and site prep and ground conditions.
Permits and site access in Frisco
City right-of-way permits; most large developments are private ground.
If the machine has to sit in the road, on a sidewalk or over a property line, that is a permitting question rather than a rental one, and it is the most common reason a delivery date slips. Tell us where the machine needs to stand and we will flag it before the quote goes out.
What tends to go wrong in Frisco
The commonest mistake here is booking for the site as it is on the day of the call. A development that is unimproved clay this month is a sealed slab next month, and a rough terrain machine on a finished floor is both an overspend and a flooring claim.
Plan the swap rather than discovering it. Where a job spans frame and fit-out, agreeing the changeover up front beats an off-hire and a fresh delivery, because otherwise you pay the transport leg twice.
How a Frisco request works
-
Step 1
Tell us the job
Send the machine or the working height, the dates and the site address.
-
Step 2
We check the market
We price and check availability with vetted suppliers covering Frisco.
-
Step 3
You get a written quote
A written figure within one business day, naming the supplier and what is included.
-
Step 4
The machine arrives
You deal with the supplier directly from there, and we stay on it until it is on site.
Frequently asked questions
What does it cost to rent a scissor lift in Frisco?
- A 26 ft electric scissor lift runs about $340–$500 for a week in Frisco. We don't publish a Frisco-specific rate. Below the five largest Texas metros the rate sampling is too thin to mean anything, so we quote the statewide band and adjust for haul distance. Longer hires drop the effective day rate sharply: a week is roughly two and a half day rates, not seven.
Do you have a yard in Frisco?
- No. We don't run a yard in Frisco. We match your job to vetted local suppliers and stay on it until the machine is on site. That is worth knowing up front, because it means we are quoting the whole local market rather than one company's price list.
What ground conditions should I expect in Frisco?
- Changes within a single project. The same Frisco site is unimproved clay during the frame and a finished slab during fit-out, often within the same quarter, which is why machines get swapped mid-hire here more than anywhere else on this list.
Will weather stop the job in Frisco?
- North Texas convective wind during the structural phase, then largely irrelevant once the building is closed in. Most platforms have a wind limit around 28 mph, and it applies to the gust rather than the average.
How is equipment rental taxed in Frisco?
- Texas charges 8.25% sales tax on bare equipment rental in Frisco. On top of that there is a 1.5% TERP surcharge on off-road diesel equipment rated 50 horsepower or more, so an electric scissor lift is taxed at 8.25% and a diesel rough terrain machine can reach 9.75%. Equipment supplied with an operator on a single charge is generally not taxed as a rental at all.
How quickly can you get equipment to a Frisco job?
- We come back with a written quote within one business day, naming the supplier. Delivery itself depends on the yard and the machine. Common sizes usually move within a day or two, and anything tall, heavy or specialised needs more notice. City right-of-way permits; most large developments are private ground.
Nearby cities we cover
Get a price estimate for your Frisco job
Tell us the job and we come back with a written quote within one business day, naming the supplier.
This is a request, not a booking. We confirm availability and final pricing with a local supplier before anything is committed.